For Iradio UV-98 PLUS 10W FM AM HF Cross Band tendance Repeater 2.4" Screen Walkie Talkie

• Frequency range

  CB:27Mhz RX/TX

  FM:64-108MHZ RX

  AM/USB/LSB/CW reception

  SW:2.3-30MHz RX

  MW:520-1710KHz RX

  LW:153-279KHz RX

  18-64MHz TX/RX

  136-520MHZ TX/RX

  RX:(AM/FM/SSB)

  18-620MHz

  840-999MHz

• 1024 channelsand three VFO channels

• Triple frequency standby function

• Cross Band Repeater

• Triple PTT transmission

• S9+field strength indicator, real-time display of field strength values

• One-click frequency measurement and remote sub-tone scan

• Customizable keyboard and side key functions.

• Two emission end tones and MDC end tones

• Manually editable device name (device name Can be used as call sign, MDC transmission and decoding)

• Manually editable channel names in both Chinese and English

• 11 NOAA weather forecast channels (available only in the United States)

• Receives aviation AM signals, frequency range 108-136MHz

• Power-saving mode, gradually deepens power saving ratio over time when enabled

• Frequency scan and channel scan functions

• Spectrum scanning function

• VOX function(Voice Activated Transmit)

• Monitoring function

• Emergency alarm function.

• Editable single-tone transmission(The 1750 Hz tone can wake up the repeater.)

• Customize the startup logo and prompt.

• DTMF encoding transmission

• DTMF remote dizziness and remote death wake-up

• Type-C charging function,Base+Type-C Two charging methods.

You can switch the frequency range according to your usage needs. The working range of the frequency band is: 18-64MHz, 64-642MHz, 840-1000MHz. These three ranges cannot work simultaneously, and an antenna compatible with this frequency range needs to be replaced before use. 18-64MHz requires replacement with an antenna compatible with this frequency range!!!! For example, the CB antenna (27MHz antenna) needs to be replaced for 27MHz, or the antenna compatible with 50MHz needs to be replaced for 50MHz!!!

This walkie talkie requires a dedicated Type-C interface Programming Cable provided by the manufacturer to be connected to a computer, and channel programming is performed using UV-98 PLUS frequency writing software. A regular mobile phone data cable or regular write frequency cable cannot establish a communication connection. If you cannot find the frequency writing software, please contact us~